Product ID:VINYL-LUX PRIMEWASH (MFR ID 353/354).
MSDS Date:01/01/1985
FSC:8010
NIIN:00N003987
MSDS Number: BCLJC

INTERNATIONAL PAINT CO., INC.

220 S LINDEN AVE
SOUTH SAN FRANCISCO, CA 94080-6411
US

Cage: 1M431

INTERNATIONAL PAINT CO INC

SOUTH SAN FRANCISCO, CA 94080-6411 US

Cage: 1M431

2-ETHOXYETHANOL (EGEE) (SARA III)

CAS: 110-80-5

RTECS: KK8050000

Fraction By Weight: 5.62%

OSHA PEL S,200 PPM

ACGIH TLV: S, 5 PPM; 9192

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

ZINC CHROMATE

CAS: 13530-65-9

RTECS: GB3290000

Fraction By Weight: 7.22%

OSHA PEL 0.1 MG/M3 (CRO3)

ACGIH TLV: 0.01MG/M3(CR)A1;9192

METHYL ISOBUTYL KETONE (SARA III)

CAS: 108-10-1

RTECS: SA9275000

Fraction By Weight: 11.4%

OSHA PEL 100 PPM/75 STEL

ACGIH TLV: 50 PPM/75 STEL; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)

CAS: 78-93-3

RTECS: EL6475000

Fraction By Weight: 4.35%

OSHA PEL 200 PPM/300 STEL

ACGIH TLV: 200 PPM/300STEL 9192

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

ISOPROPYL ALCOHOL (SARA III)

CAS: 67-63-0

RTECS: NT8050000

Fraction By Weight: 24.7%

OSHA PEL 400 PPM/500 STEL

ACGIH TLV: 400 PPM/500STEL;9192

Effects of Overexposure:INHAL:IRRITATION OF RESP TRACT, HEADACHE &
DIZZINESS. SKIN & EYE CONTACT:PRIMARY IRRITATION.

First Aid:INHAL:MOVE TO FRESH AIR, AWAY FROM EXPOS. EYE:FLUSH W/ LARGE
AMOUNTS OF RUNNING WATER 15 MIN. IF IRRITATION PERSISTS, CONSULT
PHYSICIAN.

Flash Point:35F CLOSED CUP
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL.
Fire Fighting Procedures:SMOTHER FLAMES W/EXTING MEDIA. COOL UNOPENED
CNTNRS W/WATER
Unusual Fire/Explosion Hazard:CONTAINS FLAMMABLE SOLVENT. DO NOT USE IN
AREAS WHERE SPARKS OR FLAMES ARE PRESENT.

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION. AVOID
PROLONGED INHALATION OF VAPORS. VENTILATE AREA. CLEAN UP WITH AN
ABSORBENT.

Handling and Storage Precautions:STORE IN BUILDINGS DESIFNED &
PROTECTED FOR STORAGE OF NFPA CLASS 1B FLAMMABLE LIQUIDS.
Other Precautions:IF MATERIAL EXPOS TO EXCESSIVE HEAT AS IN WELDING OR
FLAME CUTTING, IRRITATING FUMES WILL BE EMITTED & PRECAUTIONS
SHOULD BE TAKEN TO AVOID INHALATION OF THESE VAPORS.

Respiratory Protection:NIOSH/MSHA APPRVD RESP PROTECT DEPND ON
CONDITION OF USE. SUPP DATA.
Ventilation:GENERAL DILUTION OR LOCAL EXHAUST.
Protective Gloves:SEE SUPP DATA.
Eye Protection:SAFETY GLASSES
Other Protective Equipment:PREVENT PROLONG SKIN CONTACT W/ CONTAMINATED
CLOTHING.
Supplemental Safety and Health
USE RUBBER GLOVES FOR LONG OR REPEATED USE.

Boiling Pt:B.P. Text:162-241F
Vapor Density:>1.0
Evaporation Rate & Reference:SLOWER THAN ETHER.
Appearance and Odor:YELLOW LIQUID, SOLVENT ODOR.
Percent Volatiles by Volume:92.0

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:CO, CO*2, ZINC FUME, ALDEHYDES.

Waste Disposal Methods:DO NOT INCINERATE UNOPENED CONTAINERS. DISPOSE
OF IAW FEDERAL, STATE & LOCAL CODES.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.